Technical Specifications
- Pump Type: Monoblock (Centrifugal/Self-priming)
- Power: 0.5 HP to 1.5 HP
- Voltage: 230V/415V AC, 50Hz
- Pressure: 2 – 5 bar (30 – 70 PSI)
- Flow Rate: 10 – 40 LPM
- Pipe Size: 6mm / 8mm OD (PU/Nylon)
- Nozzles: Brass/SS, 0.3–0.5 mm orifice
- Nozzle Flow: 0.3 – 0.8 LPH
- Coverage: 1–2 meter radius per nozzle
- Filtration: Inline filter (50–100 micron)
- Control: Manual switch / Optional timer
- Accessories: Clamps, holders, mist fans (optional)
Low pressure misting system
MISTING SYSTEM - GENERAL INSTRUCTIONS
- Best suitable for dust suppression, Terrace gardens and Indoor / Outdoor cooling like Portico.
- Always keep the pump below the tank level to increase the suction and achieve maximum pressure.
- Misting is possible only at high pressure
- Liquids used should be free from debris and sediments as it affects the performance of the mist nozzles.
- Adjust the pressure to the mist nozzles by opening the liquid return line accordingly. Certain quantity of
- water should be sent in the return line for optimal performance.
- Shutting the liquid return line to the tank completely affects the performance of pump and hence causes
- heating and affects the overall performance of the system.
- Use enough Teflon tapes where ever necessary in Joints and threads.
- Advised to deploy a plumber during initial setup.
- 16 meters of PU hose supplied with the setup.
- Install the nozzles on the sides of the subject at an approximate angle of 45 degree from sides for maximum
- performance.
- Use plastic tag to tie the nozzles/hose to the poles or structure.
- Clean and maintain the system and nozzles periodically.
Additional information
Low Pressure Misting System | 150 PSI Diaphragm Pump |
---|
You must be logged in to post a review.
Reviews
There are no reviews yet.