Technical Specifications
- Pump Type: Diaphragm Pump
- Operating Pressure: 5 to 10 bar (70–150 psi)
- Flow Rate: 1 to 5 LPM (Litres Per Minute)
- Power Supply: 230V AC / 12V or 24V DC (as per model)
- Motor Type: Brush/Brushless Motor
- Nozzle Type: Brass or Stainless Steel Misting Nozzles
- Nozzle Orifice Size: 0.3 mm to 0.5 mm
- Coverage Area: Approx. 10–20 sq. ft. per nozzle
- Pipe Material: Nylon / PU / PE tubing
- Pump Protection: Thermal overload protection
- Mounting: Wall/floor mount with anti-vibration pads
- Applications: Outdoor cooling, poolside, greenhouse, patios
Low pressure misting system Diapharam pump
MISTING SYSTEM - GENERAL INSTRUCTIONS
Best suitable for dust suppression, Terrace gardens and Indoor / Outdoor cooling like Portico.
Always keep the pump below the tank level to increase the suction and achieve maximum pressure.
Misting is possible only at high pressure
Liquids used should be free from debris and sediments as it affects the performance of the mist nozzles.
Adjust the pressure to the mist nozzles by opening the liquid return line accordingly. Certain quantity of
water should be sent in the return line for optimal performance.
Shutting the liquid return line to the tank completely affects the performance of pump and hence causes
heating and affects the overall performance of the system.
Use enough Teflon tapes where ever necessary in Joints and threads.
Advised to deploy a plumber during initial setup.
16 meters of PU hose supplied with the setup.
Install the nozzles on the sides of the subject at an approximate angle of 45 degree from sides for maximum
performance.
Use plastic tag to tie the nozzles/hose to the poles or structure.
Clean and maintain the system and nozzles periodically.
Additional information
Low Pressure Misting System | 150 PSI Diaphragm Pump |
---|
You must be logged in to post a review.
Reviews
There are no reviews yet.