Indoor High Pressure Misting System
Indoor High-Pressure Misting System helps reduce the temperature by 12 degrees Celcius without wetting the surface.
Technical Specifications
- Operating Pressure: 70 – 100 bar (1000 – 1500 psi)
- Pump Type: Triplex plunger pump (industrial-grade, brass head)
- Motor Power: 0.75 – 2 HP (depends on nozzle quantity)
- Nozzles: Stainless Steel or Brass, Anti-Drip, 0.15–0.30 mm orifice
- Misting Line: SS or Nylon tubing (¼" or ⅜" size)
- Filters: Dual-stage filtration (5 micron + 1 micron)
- Flow Rate: 1 – 6 LPM (depends on system size)
- Automation: Timer/Controller (optional humidity/temp sensor)
- Coverage Area: Depends on nozzle spacing (typically 3–5 ft apart)
- Mounting: Wall/Ceiling-mounted nozzles or fans
- Water Supply: RO/Softened water recommended
- Usage: Dust suppression, temperature control, humidity maintenance
Air conditioning systems perform at their worst on hot summer days, just when they are needed the most. The cooling capacity decreases by 14-15% and the power draw increases by 31%. The problem occurs in condensers which have to change vapors refrigerant into liquid forcing the air through the unit and absorbing heat from the refrigerant causing it to condense.
Applying a water fogging system to air-cooled chillers can improve the efficiency under most of the working conditions, as the water mist could lower the air temperature entering the condenser.
On typical air-cooled chillers, a reduction in condenser air temperature of 6 °C will result in a 14% improvement in efficiency and 12°C about 25-30%.
BENEFITS
- The air temperature outside the unit lowered by up to 12 °C
- Energy consumption decreased, as much as 30%
- Increase the efficiency of HVAC units up to 30%
- Live of the whole system extended
- Low start-up and operating costs
- Quick installation
Additional information
Mid Pressure Misting System | Pump |
---|
You must be logged in to post a review.
Reviews
There are no reviews yet.