Whole House Filters
Home > Product > Water Saving Products
Showing all 7 resultsSorted by price: high to low
Whole House Water Filters – Filter Every Tap in Your Home
Say goodbye to selective treatment. With a whole-house water filter, you ensure that every tap, shower, washing machine, and appliance in your home receives filtered, safer water.
Whether your supply comes from a municipal connection or borewell, and whether you’re dealing with chlorine, sediment, scale or odour, these systems are engineered for long-lasting performance and whole-home protection — all while supporting sustainability goals and reducing long-term maintenance costs.
Why Choose Our Whole House Filters?
Point-of-entry filtration – treat 100% of water entering the house
Removes sediment, chlorine, rust, odour – protect plumbing & health
Improves bathing, laundry & appliance performance
Designed for Indian feed water conditions – pressure variance, TDS, mineral load
DIY/Service-friendly design – quick cartridge change, low maintenance
Product Range
| Model | Capacity (L/hour) | Filtration Stages | Best For |
|---|---|---|---|
| WHF-Standard 3 Stage | 2,000–3,000 L/hr | Sediment + Carbon + KDF | 2–3 BHK apartments (municipal water) |
| WHF-Plus 3 Stage | 3,000–4,500 L/hr | Sediment + Dual Carbon | Villas, row-houses with mixed water source |
| WHF-Pro + Softener | 4,000–6,000 L/hr | Sediment + Carbon + Softener | Borewell-heavy homes with scaling issues |
| WHF-Ultra + UV | Custom | Full + UV | For microbial-risk zones, rural setups |
How the System Works
Installed at Entry Point
Treats water at the main inlet, before distribution across taps
Pre-Filter Stage
Removes sediment, silt, rust – prevents clogging of finer filters
Main Filter Media
Activated carbon, KDF, or catalytic media remove chlorine, odour, chemical residue
Optional Add-ons
Softening, UV, or even RO-based units for highly contaminated sources
Flow-Rate Optimization
Systems are designed to support multi-tap usage with minimal pressure drop
Service & Maintenance
Filter changes typically required every 6–12 months based on usage
Frequently Asked Questions for Whole House Filters
1: Do I still need my under-sink drinking filter?
Possibly. Whole-house systems improve overall water quality (chlorine, sediment, scale), but may not remove all microbial or chemical contaminants. For drinking, many households still use a dedicated RO/UV system.
2: Will it lower my water pressure?
Not if sized correctly. Our systems are selected to match your flow rate needs. Undersized systems can reduce pressure – we help ensure proper sizing based on taps, showers, and usage.
3: How often do I need to change the filters?
Most pre-filters last 6–12 months. Carbon or specialty media may last longer depending on quality of incoming water and daily usage.
4: Is it suitable for borewell or hard water?
Yes. We offer systems with KDF, softening media, or even UV units for tougher water conditions. A quick water test helps us recommend the right model.
5: What’s the installation process like?
The filter is typically installed at your main water inlet (before the overhead tank or plumbing distribution). We offer installation guidance or full setup support via local partners.