1 Micron Sediment Filter Cartridge

1 Micron Sediment Filter Cartridge

1 Micron Sediment Filter Cartridge

1 Micron Sediment Filter Cartridge

Experience cleaner, clearer water every day! The 1 Micron Sediment Filter Cartridge removes dust, dirt, rust, and ultra-fine particles — protecting your RO system, appliances, and plumbing. Designed for quick installation and long service life, it’s the smart choice for pure water and smooth system performance.

The 1 Micron Sediment Filter Cartridge is a precision-engineered, high-capacity depth filter that eliminates contaminants as small as 1 micrometre. Built using melt-blown polypropylene (PP) technology, it features a graded density structure — capturing larger particles on the outer surface and trapping finer impurities within the core.

This ensures optimal pre-filtration for RO systems, UV purifiers, water softeners, and whole-house filters — safeguarding your entire setup from clogging and wear. Whether you're using borewell, municipal, or tank water, this filter enhances system performance while keeping your water visibly clean.

  • 1-Micron Filtration: Removes ultra-fine particles like silt and rust for crystal-clear water.
  • Graded Density Design: Outer layer traps larger particles, core traps fine sediment.
  • Food-Grade & Non-Toxic: Safe for drinking water; chemical and bacteria-resistant.
  • Universal Fit: Works with all standard 10” or 20” housings (2.5”/4.5”).
  • Easy Maintenance: Replace in minutes — no tools needed.
  • Low Pressure Drop: High porosity ensures steady water flow.
  • Applications: Ideal for RO systems, UV, softeners, tanks, and mainlines.
  • Long Life: Typically lasts 3–6 months, depending on water quality.

Parameter

Details

Micron Rating

1 Micron (Nominal)

Filter Media

Melt-Blown Polypropylene (Food-Grade)

Sizes Available

10″ × 2.5″, 20″ × 2.5″, 20″ × 4.5″

Flow Rate

10–20 LPM (based on size & water pressure)

Operating Temp

4 °C – 60 °C

Max Pressure

80 PSI (5.5 bar)

Capacity

Approx. 5,000–10,000 L (varies by sediment load)

End Cap Design

DOE (Double Open End)

Replacement Interval

Every 3–6 months

Compatible Systems

RO, UV, softeners, tanks, plumbing mainline systems
  • Protects Expensive Equipment: Prevents RO membrane clogging and extends system lifespan.
  • Backed by Material Safety: Made from certified, FDA-compliant PP – non-toxic and odorless.
  • Perfect for All Water Sources: Borewell, municipal, and overhead tank water systems.
  • Trusted by Thousands: Recommended for both residential and commercial applications.

1. Is a 1 micron filter better than a 5 micron filter?
Yes. It removes finer particles, offering superior filtration – but may clog faster in heavy sediment conditions.

2. Can it remove bacteria?
It may trap larger bacteria, but for full purification, pair with UV or RO systems.

3. How long does it last?
Typically 3–6 months. Replace when you notice reduced water flow or discoloration.

4. Is it suitable for borewell water?
Absolutely. It effectively filters fine mud, sand, and rust.

5. Will it reduce water pressure?
Slightly, but its design ensures optimal flow in normal domestic use.

Related products