Mist Nozzle online india
high pressure mist nozzle india

High Pressure Mist Nozzle

₹185.00

(1 customer review)

Anti drip misting nozzle | water fogger nozzle | high pressure misting nozzle

Technical Specifications

  • Material: Stainless Steel (SS 303/316), Brass with SS insert, or Ceramic

  • Orifice Size: 0.1 mm to 0.5 mm (common: 0.15 mm, 0.2 mm)

  • Thread Type: 10/24 UNC, 1/8" NPT, 1/4" NPT

  • Operating Pressure: 30 – 1000 psi (common: 500–1000 psi)

  • Flow Rate: 0.025 – 0.1 L/min

  • Spray Angle: 60° to 80°

  • Droplet Size: 5 – 50 microns

  • Filtration Requirement: Minimum 5-micron filter

  • Connection Type: Threaded / Quick Connect / Push-fit

  • Anti-drip Valve: Optional (spring-loaded)

  • Applications: Cooling, Humidification, Dust Suppression, Agriculture, Odor Control

Key Features

  • Produces ultra-fine mist (5–50 micron droplets)

  • Operates efficiently at high pressure (up to 1000 psi)

  • Uniform and wide-angle spray coverage (60°–80°)

  • Low water consumption with precise flow control

  • Anti-drip valve option prevents water leakage

  • Clog-resistant design with swirl orifice

  • Made from durable materials (SS, brass, ceramic)

  • Corrosion and wear-resistant construction

  • Easy to install (threaded or quick-connect)

  • Suitable for outdoor and industrial environments

High pressure Anti drip Misting nozzles function in cooling by atomizing pressurized water into aerosol particles that "flash-evaporate". The smaller the water droplets, the better the cooling. the throw of mist nozzles can go up to 2 to 3 meters.

Higher the pressure, fine mist is produced High Pressure Mist Nozzle with a wide range of orifice from 0.10mm, 0.15mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm, 0.60 mm These cleanable Anti-Drip nozzles provide long-lasting performance for a variety of applications with corrosive and higher viscosity liquids. Most common uses include mid/high pressure misting systems, mosquito/insect control systems, odor control, and special effects.

Misting System Nozzles Characteristics: Cleanable Stainless Steel Orifice Fine Atomization 3/16 Thread Stainless Steel Body Built in Anti-Drip Feature   High Pressure springs need 250 psi to open / Low pressure springs need 65 psi to open 100 psi is recommended. Specify what springs you need. Note: Low pressure springs performance may vary. These nozzles will work with no springs as well. The .012″/.30mm nozzle is the medium-sized standard nozzle orifice.

At 1,000 psi, the mean diameter of the droplets from this size orifice are 13.1μ with droplets ranging from 1.6μ to 39.1μ with a spray diameter of between 65 degrees and 75 degrees. The .012″/.30mm misting nozzle is ideal for applications requiring moderate flow with small droplet size. It has a similar performance to the .008″/.20mm orifice nozzle with an increased flow rate. It is most commonly used for outdoor cooling odor/dust control applications. This nozzle can be used with any pressures.100 psi or more is better.

Additional information

Connection Size

G 3/16th Thread or 10/24th Thread
Orifice Diameter

0.1 mm, 0.15 mm, 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm

1 review for High Pressure Mist Nozzle

  1. Chennai95 –

    works perfectly.

Add a review

Related products